Automatic Flotation Magnetic Separator

The Automatic Flotation Magnetic Separator is used for magnetite ore processing. It's mainly used for the cleaner stage in iron ore separation. It effectively increases Fe content and decreases the silica for final product. It has been found to normally increase the concentrate grade by 2-9% which can greatly increase the systems overall efficiency

Product Features

A Large Increase in The Concentrate Grade.  A positive and negative pulsation of the magnetic field allows for the particle to be loosely suspended in a slurry for a thorough discharge of the gangue and intergrowth. This enables the separator to both effectively improve the grade of the magnetic concentrate and control the magnetic material from draining into the tailings.

A High Degree of Automation. The water and slurry volume, overflow density, discharge density and magnetic intensity is all automatically adjusted based on the specific properties of the minerals. This virtually guarantees the best separation possible throughout the process, even when the material's properties change through normal fluctuations of ore grade.

Simplified Process Flow. The magnetic flotation separator replaces the traditional finishing equipment. By doing so it not only lessons the amount of equipment needed to complete the process, but, also reduces both water and power consumption.

Stable Separation. By means of having a larger separation area the amount of fluctuations in the end product are greatly reduced. When the change of material is within 60% of the normal feed product the end user can expect a stable and consistent product.

Power and Water Savings. Positive and negative pulsations of the magnetic field, automatic feed control over the water and slurry levels as well as the magnetic intensity all allow for the maximization of resource use.

Remotely Controlled. Using a PLC module the unit can easily be monitored and adjusted, if ever desired, from the end users computer system in the central control room.

Adaptable Capacity. Based on the customer's needs, there are models ranging from the LJC-2000 to LJC-9000. This allows the end user to select a device capable of processing for their needs, up to 80 tons per hour per unit.

*Fully automatic
*Smart separation
*Easy operation
*Water saving
*Low maintenance cost

Application

The Automatic Flotation Magnetic Separator is installed after the cleaner wet drum magnetic separator in a beneficiation plant. It has been found to normally increase the concentrate grade by 2-9% which can greatly increase the systems overall efficiency.

The Customer Site Case
 

LONGi 's Service Guarantee

One on One Service

LONGi's in house laboratory is well known for providing professional and accurate sample testing for a wide variety of clients in both the mineral and recycling industries. Based on the lab test results and often a necessary site survey our experienced engineers are proud to be able to offer the best solution available every time we can. Not only do we look for the solution to best process the end users material, but, we are mindful to provide the best value and performance in the most economical way.

Valuable Site Service

LONGi is proud to be able to provide experienced mechanical, electrical and magnetic engineers able to assist with most any installation, commissioning or training issues that may arise.

Our main goal is to eliminate any situations before they arise at the work site both before and after the project. LONGi also has strategically located offices within easy access to current and future operating sites to provide spare parts and service and allow for minimal down time.

Ongoing Feedback Service

LONGi is as concerned with not only the equipment we are selling tomorrow, but, with those out in the yield already. With a customer first attitude LONGi makes it a point that past sales are just as important as the future. Because of this LONGi will periodically check in with current users to gather feedback and offer any practical feedback or necessary adjustments that will help obtain the upmost benefit to all our customers.

Certificates



LONGi Laboratory introduction

LONGi Laboratory was established in 2006. It is a comprehensive mineral processing laboratory with magnetic separation gravity separation, flotation and X-ray separation. It is an important part of the magnetic separation engineering technology research center which is approved by CMIF (China Machinery Industry Federation).The laboratory covers an area of more than 4000 square meters, with a complete single magnetic separation testing machines and with a combined in any combination of magnetic separation, gravity separation, and flotation separation testing lines.

The LONGi mineral processing laboratory can conduct mineral processing research experiments, confirmatory experiments and process flow sheet design experiments, analyze the properties of the ore in combination with the experimental data, and provide optional experimental reports, and provide process flow sheet and the basis for equipment model selection.

The LONGi mineral processing Laboratory can provide mineral processing experiments and main mineral elements analysis services for domestic and foreign beneficiation plants and scientific research institutes. It also undertakes the internship tasks of undergraduate and graduate students majoring in mineral processing at China University of Mines, Northeastern University and other universities. It is a test base for high-tech mineral processing equipment and the cradle of technical talents in mineral processing in northern China.


Packing, Storage, and Transportation

Longi has plenty of cases and much experience for delivery of the heavy equipment. Some of the equipment is disassembled into pieces during shipment. The key parts like motor will be fully sealed during transportation.