Guitar World is supported by its audience. When you purchase through links on our site, we may earn an affiliate commission. Here’s why you can trust us.
By Huw Price ( Guitarist ) published 27 April 22
Everything you need to know – and more – about modifying your P-90s
P-90s are easy to modify. Changing the magnets and the pole screws can make a big difference; it’s a lot cheaper than buying new set of pickups and you don’t even need a soldering iron. Although stronger magnets produce higher output, it’s not all about power.
Each grade of Alnico has distinct qualities that contribute to the midrange voicing of a pickup. For instance, Alnico III has a similar midrange quality to low gauss Alnico V, but its tone is sweeter, softer and less aggressive. Alnico II can sound bright and clear, while Alnico IV may have a flat and fairly neutral frequency response.
Full gauss Alnico V will provide brightness, cut and grunt, and it’s well suited to classic rock, heavy blues and punk tones. At the hottest end of the spectrum, Alnico VIII and ceramic magnets will give you the power and aggression you need for heavier rock and metal styles, but your clean tones may be compromised.
Swapping the magnets involves loosening the two baseplate screws, sliding out the magnets and sliding the new ones in. It’s easier to replace one magnet at a time, and make sure both the south poles are facing the screws. While the pickup will sound the same with the north poles facing inwards, the modified pickup may end up being out of phase with the stock pickup.
It’s important to note that P-90 magnets can slide out of alignment over time. This shift refocuses the magnetic field and it can affect the amount of midrange honk and quackiness. If you fancy a bit more vintage character, try loosening the baseplate slightly and carefully offsetting the magnets. You’ll have to experiment to find the degree of offset you like best, and don’t forget to retighten the baseplate screws.
Steel is graded by its carbon content and this is another factor that affects tone. Jon Gundry of Throbak Electronics in Michigan reports vintage pole screws varying from 1006 to 1018. Try 1010 screws for a sweeter and more vintage tone with a softer attack. To emphasise upper mids, punch and output, go for 1018, 1020 or even 1022.
This modification simply involves removing the old screws and screwing the replacements in. There’s probably no need to take the pickups out of the guitar, but we recommend using an electric screwdriver rather than a manual one to save time. Replacement screws can be purchased from Sunbear Pickups here in the UK.
For a brighter and more open tone, try plastic rather than metal covers. But if your P-90s sound too aggressive and bright then metal covers might help. Changing the covers is also a good way to customise the look of your guitar.
Lastly, the fixing screws for soapbar P-90s were originally brass, but modern equivalents may be steel. Steel screws behave like two extra pole screws and can produce a bit more output and stronger mids. Brass screws may give you a more even string-to-string balance.
Thank you for reading 5 articles this month*
Join now for unlimited access
US pricing $3.99 per month or $39.00 per year
UK pricing £2.99 per month or £29.00 per year
Europe pricing €3.49 per month or €34.00 per year
*Read 5 free articles per month without a subscription
Join now for unlimited access
We’d love to stay in touch, sign up for The Pick team to contact you with great news, content and offers.
Thank you for signing up to The Pick. You will receive a verification email shortly.
There was a problem. Please refresh the page and try again.
Guitar World is part of Future plc, an international media group and leading digital publisher. Visit our corporate site (opens in new tab) .
© Future Publishing Limited Quay House, The Ambury, Bath BA1 1UA. All rights reserved. England and Wales company registration number 2008885.